Increase accuracy and safety with new rifled barrels!

 

PVC pipe and fittings are not approved by the manufacturer to be used for constructing spudguns.

  Home         Launchers         Components         Parts Store         Customer Service         New Forum        

 0-100 psi Pressure Gauge.
 1.5" CLEAR SCH 40 Rifled Pipe - 4 foot
 1.5" SCH 40 Rifled PVC Pipe
 125 psi safety pop-off valve.
 2" SCH 40 Rifled PVC Pipe
 2" SCH 80 Rifled PVC Pipe
 2" SCH 80 Smoothbore Pipe
 2.5" SCH 40 Tennis Ball Barrels
 4" CLEAR SCH 40 PVC Pipe
 6" sch 40 PVC pipe
 Bag-o-balls
 BBQ Ignitor
 CO2 Regulator Setup
 GolfBalls
 Rifled Barrel T-Shirt
 Schrader Valve
 Sprinkler Valves/Systems
 Supah-Balls
 The SGTC Propane Metering Device.
 The SGTC Supah-Valve
 www.Spudtech.com T-shirt
 

Details for the The SP9004

Move over Plastic... Now, time to get serious.

Several summers ago (1996 I think) Ed Goldmann sat down and set out on a journey; He needed more, and proving the critics (His friends) wrong created the most advanced, automated, fastest loading and firing potato launcher known to exist! After a few trips to the bar with friends for design sessions on napkins with crayons (no joke!), and about 50 hours of solo design/ACADR12 work, the SP9004 was born.

The SGTC is not selling plans to make this anymore. I am considering making a new version of the plans that are easier and cheaper to make/cheaper for you to buy in the future.

Hence, the SP9004 now in true operating form, optimized over the past several years. Pure oxygen and propane fueled, laser sighted, bolt action, electrically controlled....This is one awesome piece of launching ordinance! It shoots spuds quite fast and is VERY cool looking. It is so cool looking Ed sent a picture to the feds (ATF) along with a letter querying the SP9004's legality with the understanding it is for recreational launching of potato slugs only. Read the letters in the stories section of the site.

This launcher is not for sale. It was designed and built by Ed Goldmann (the previous owner) as a novelty mainly to see if it could be done. It is far to labor intensive and time consuming to be a production model. Not to mention expensive. As noted above, plans are not available at this time. I may offer them again once I get the time to re-work the plan sets.

This product is not available for purchase at this time.

 

This website and all contained text and images © 2001-2010 Spudtech LLC | Disclaimer | Privacy Policy